POLYSEAL PRIMER Â VIEW PRODUCT Â BROCHURECORKJOINT Polyseal Primer is a single component adhesion promoting primer for use with polysulphide joint sealants, which forms a high chemical bond between the substrate and the joint sealant. To strengthen the adhesion of Polyseal PS to porous surfaces such as concrete, brickwork, gypsum board, timber and stone. Also used to stabilise and seal the joint...
J-SEAL® EX TPER Sealing and Waterproofing Membrane  VIEW PRODUCT BROCHURECORKJOINT J-Seal® EX TPER Sealing and Waterproofing Membrane, made from Thermoplastic Elastomeric Rubber, is for flexible sealing and waterproofing of expansion joints subject to high movement for use in many different types of joints in concrete and over cracks, in buildings, bridges, road-works, tunnels, water works,...
J-SEAL TPER Joint Seal  VIEW PRODUCT BROCHURECORKJOINT J-Seal® TPER Joint Seal, made from Thermoplastic Elastomeric Rubber, is a pre-formed joint seal for use in expansion and construction joints in concrete to prevent the egress of water through the joint, and to seal against the infiltration of debris and foreign matter from entering the joint. is a pre-formed joint seal for use in expansion...
X-TITE® SBA MTMULTI TEMPERATURE GRADE TWO PART EPOXY SEGMENTAL BRIDGE ADHESIVE  VIEW PRODUCT BROCHURE X-TITE® SBA MT Segmental Bridge Adhesive is a high build, solvent free thixotropic epoxy resin specifically developed for use as an adhesive for precast segmental bridge elements. It is suitable for use at different temperatures (mixed product) range of 20C to 40C and can be applied in ambient...
CJ EPOXY ADHESIVE  VIEW PRODUCT BROCHURECORKJOINT CJ Epoxy Adhesive is a 100% solid two component epoxy adhesive, with thixotropic features, formulated to apply easily without any sagging, achieving excellent bonding to different substrates. CJ Epoxy Adhesive is used to install Corkjoint’s TX-100 PVC Waterstop and also for use with Corkjoint’s J-Seal EX Sealing Membrane. Non-sagging, thixotropic...
CJ-100 AdhesiveClick on Image to view full screen VIEW PRODUCT BROCHURECONTACT CORKJOINT FOR FURTHER INFORMATIONCORKJOINT CJ-100 Adhesive is a premium quality solvent-based synthetic rubber resin adhesive formulated to bond a variety of common materials. It has high viscosity, short tack time, is easy-to-apply, offers superior bonding strength and cost savings. CJ-100 Adhesive is used to...
DOWELFORM® Dowelbar Sleeve System  VIEW PRODUCT BROCHURECORKJOINT DOWELFORM® Dowelbar Sleeve System is a two part system comprising a rigid PVC dowelbar sleeve and a reusable rigid PVC nailing plate. Dowelform is suitable for use with 20mm, 25mm and 32mm round or square dowelbars. DOWELFORM® Dowelbar Sleeve System allows for longitudinal movement as well as lateral (sideways) movement of the...
EZE-CRACK® Metal Crack Inducer  VIEW PRODUCT BROCHURECORKJOINT Eze-Crack® Metal Crack Inducers are used in concrete slabs to induce controlled cracks at specific locations while allowing for continuous concrete pouring. Eze-Crack® Metal Crack Inducer is made from rigid galvanised metal. It is positioned after levelling/screeding of the concrete has been undertaken and must be inserted into wet...
PERMABAN ARMOURED JOINTS AND DOWEL SYSTEMS Â VIEW PRODUCT BROCHURE - ARMOURED JOINTS PRODUCT OVERVIEW Â VIEW PRODUCT BROCHURE - DOWEL SYSTEMS Â VIEW PRODUCT BROCHURE - ALPHAJOINT Â VIEW PRODUCT BROCHURE - BETA JOINT Â VIEW PRODUCT BROCHURE - ECLIPSE Â VIEW PRODUCT BROCHURE - SIGNATUREPermaban Armoured Joints and Dowel Systems perform the important job of load transfer between adjacent concrete slabs....