• Non-absorbent.
• Lightweight & durable.
• No bitumen content.
• Ability to compress and recover.
• Non-extruding from joint movement.
• Suitable for submerged or trafficable joints.
• Durable

Eze-Flex is available in roll form of 75, 100, 125, 150, 200, 250 & 300mm high and special custom sizes are also available. Roll length are in 25 metres and available in thicknesses of 10, 12, 15, 20 & 25mm. The 10mm thickness product comes with a 10mm zipped cut on top for easy removability for future joint sealant placement. Eze-Flex also available in sheet sizes 2m x 1m. Eze-Flex rolls are also available with a self-adhesive back on one side. Eze-Flex stock standard density is 25kg/m³.

FOR 25kg/m3 DENSITY

Jointflex® is cut to size from sheets with a sharp retractable blade and adhered to the first concrete structure by a contact adhesive. Adhesive is applied directly to the Jointflex® in 50mm diameter ‘spots’ @ 300mm centers (approximately) or as required. Also refer to our installation method, available upon request

Where shown in the Brochure drawings, the expansion joint fillerboard shall be Eze-Flex, closed cell polyethylene fillerboard material, with a minimum density of 25kg/m³, as supplied by CORKJOINT. The fillerboard must also be supplied with a factory pre-cut, zipped top, to a minimum depth of 10mm to aid in easy and clean removal for easy joint sealant application. The application/installation of the product must be in accordance with the manufacturer’s recommendations.

For further information or advice on health and safety precautions, safe handling, storage and correct disposal of products, please refer to the most recent product Safety Data Sheet (SDS), which is available upon request. 

The information and the recommendations relating to the application and end use of this product are given in good faith and are based on the information provided by the manufacturer of the product and/or the Company’s current knowledge and experience in connection with the product when properly stored, handled and applied under normal conditions and no liability of final function at the job site is assumed. In practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchantability of, or fitness for, particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any written and/or oral recommendations, or from any other advice offered by the Company. The Company also has no express or implied knowledge of any particular purpose for which the product is required and any such information given will not be taken into account in the supply of this product. No responsibility or liability by the Company will be accepted for misuse, misreading or derivation from recommended guidelines in respect of this product and the user shall determine the suitability of the product for his intended use and assume all risks and liability in connection therewith. The information contained in our brochure may change at any time without notice. Any use of this product, EZE-FLEX Closed Cell Polyethylene Fillerboard, in any application should be approved as suitable for use/application by the Design Engineer and Project Manager.